Products 1-12 of 89
Show
3s 11.1V 2200mAh 30C LiPo Battery arduino battery, LiPo, Lithium Ion Battery, LiPo Battery, 3 cell lipo battery, 11v lipo battery, 2200mAh battery, 3s 11V 2200mah 25C lipo battery
Price: $19.95
Availability: In Stock

    Whether you've got a crawler, biped or rover, you're going to need a battery pack to get your robot moving on its own. Lithium Polymer batteries are a great choice for robot batteries because they have great capacity-to-weight ratios, giving you lots of power for very little weight. Our 3s 11.1V 2200mAh 30C LiPo Battery is a great medium sized battery that can discharge up to 66A continously! To make it easy to connect/disconnect the battery from your project, each of these batteries has a Female T-Connector (Deans Ultra Plug compatble). They also have a standard 4-pin JST connector (.1"/2.54mm) that breaks out each cell for balance charging or battery testing. You can charge these batteries with our Mini Balance Charger or the Imax B6...

    Floureon 11.1V 4500mAh 30C LiPo Battery arduino battery, LiPo, Lithium Ion Battery, LiPo Battery, 3 cell lipo battery, 11v lipo battery, 4500mAh battery, 3s 11V 4500mAh 25C lipo battery
    Price: $29.95
    Availability: In Stock

      Whether you've got a crawler, biped or rover, you're going to need a battery pack to get your robot moving on its own. Lithium Polymer batteries are a great choice for robot batteries because they have great capacity-to-weight ratios, giving you lots of power for very little weight. Our 3s 11.1V 4500mAh 35C LiPo Battery is a great medium sized battery that can discharge up to 66A continously! To make it easy to connect/disconnect the battery from your project, each of these batteries has a Female T-Connector (Deans Ultra Plug compatble). They also have a standard 4-pin JST connector (.1"/2.54mm) that breaks out each cell for balance charging or battery testing. You can charge these batteries with our Mini Balance Charger or the Imax B6...

      LiPo Battery Wiring Harness battery, wiring, harness, power, dean plug, barrel plug, battery link, lipo battery harness, lipo harness
      Price: $8.95
      Availability: In Stock

        Easily link your project to a LiPo battery with the Battery Wiring Harness! This harness is the same one we use in our Hexapod and Quadruped kits. Just attach the male Dean connector to any of our LiPo Batteries and the barrel jack plug into your project, and you're ready to go! The harness even has a built in switch to quickly shut down power to your project. The switch is easily mountable - just cut a 6mm hole into your project and use the included nut and washer to securley fasten the switch to your chassis. The standard 2.1*5.5 male barrel jack connection will fit any 2.1*5.5 female barrel jack connection, such as Arduino/Seeduino Boards, a Female Pigttail Lead or the AX/MX Power Hub. Alternativley, you can just cut of the barrel jack...

        Arbotix M Robocontroller
        Price: $39.95
        (1)
        Availability: In Stock

          The ArbotiX-M Robocontroller is at the heart of every Interbotix Robot. This versatile robot controller is an advanced control solution for BIOLOID and DYNAMIXEL based actuators. As an Arduino compatible microcontroller the Arbotix Robocontroller also benefits from a huge open source community of libraries and examples. Since its release in 2010 the Arbotix has quickly become a favorite among builders worldwide from hobby to high level research. The 'M' in ArbotiX-M stands for mini - this new board is over 25% smaller than the original ArbotiX! The changes from the ArbotiX to the ArbotiX-M are as follows: A smaller footprint(61mm X 61mm) 10 more general purpose I/O pins Barrel Jack for DC Power Separate Power Bus for 4 PWM Digital outputs...

          Imax B6 Multi-Function LiPo Balance Charger Imax, B6, Multi-Function, Balance, Charger, LiPo, Lithium, Polymer
          Price: $34.95-$54.90
          Availability: In Stock

            The IMAX B6 is an advanced multi-function charger, able to charge, balance and discharge Lion, LiPo, LiFe (A123), NiCd and NiMH batteries. It can also be used to charge Lead Acid (Pb) batteries. It has a wide variety of voltage settings for charging various cell count batteries, as well as a 0.1 amp adjustable charge rate of up to 5 amps. To use this charger with our line of Thunder Power LiPos, you will need an E-Flite Balance Charger Adapter Cable Pack. This charger requires an 11-18v input source rated at 5 amps, and uses a 2.5mm/5.5mm jack (adapter for our 2.1/5.5mm power supplies found here.) Use the drop down above to add one of our 12v 5A Power Supply and Adaptor Jack along with your charger. Product Features Microprocessor...

            ROBOTIS FR12-H101K Set ROBOTIS, frame, bracket, hinge, FR12, H101K, Set
            Price: $33.90
            Availability: Special Order

              Hinge frame set for DYNAMIXEL X-series 430 models. Hinge frame and Idler Bearing set are included. Cannot be assembled with DYNAMIXEL MX series.

              ROBOTIS FR12-S101K Set ROBOTIS, FR12, S101K, hinge, bracket, frame, Set
              Price: $23.90
              Availability: Special Order

                Frame for DYNAMIXEL X-series 430 models. Can be used by assembling on the side of the actuator. Cannot be assembled with DYNAMIXEL MX series.

                ROBOTIS FR12-S102K Set ROBOTIS, FR12, S102K, hinge, frame, side, bracket, Set
                Price: $15.90
                Availability: Special Order

                  Frame for DYNAMIXEL X-series 430 models. Can be used by assembling on the side of the actuator. Cannot be assembled with DYNAMIXEL MX series.

                  ROBOTIS HN12-I101 Set ROBOTIS, HN12, I101, hinge, bracket, frame, Set
                  Price: $14.90
                  Availability: Special Order

                    HN12-I101 is the standard idler bearing set for Dynamixel X-series 430 models. This idler bearing is connected to the opposite side of the output shaft of Dynamixel X, and can be used to assemble the hinge frame on it. Patented hollow structure enables this set to be assembled with Dynamixels without screws. (Enclosed screws are used to assemble the frame to the idler.) This idler bearing set cannot be assembled with Dynamixel MX series.

                    ROBOTIS HN12-N101 Set ROBOTIS, HN12, N101, hinge, bracket, frame, Set
                    Price: $11.90
                    Availability: Special Order

                      HN12-N101 is the standard horn set for Dynamixel X-series 430 models. This horn set can be assembled on the output shaft wheel gear of Dynamixel X in order to assemble with frames such as a hinge or an adapter. This horn set cannot be assembled with Dynamixel MX series and previous frames.

                      ROBOTIS ROBOT CABLE-X4P 100MM (10EA) ROBOTIS, ROBOT, CABLE, X4P, 100MM, pack, x series, wire
                      Price: $13.90
                      Availability: Special Order

                        This is the RS-485 communication 4P cable set for Dynamixel X-series. Flexible sheath resists against breaking and peeling of the cable. High pull out force of the connector maintains stable connection. The cable holder will help user to achieve neat cable wiring. Compatible with Dynamixel XM430.

                        ROBOTIS ROBOT CABLE-X4P 180MM (10EA) ROBOTIS, ROBOT, CABLE, X4P, 180MM , wire, x series
                        Price: $16.90
                        Availability: Special Order

                          This is the RS-485 communication 4P cable set for Dynamixel X-series. Flexible sheath resists against breaking and peeling of the cable. High pull out force of the connector maintains stable connection. The cable holder will help user to achieve neat cable wiring. Compatible with Dynamixel XM430.