The BIOLOID Compatible Metal F1 Bracket is an aluminum replacement for the standard BIOLOID F1 bracket. 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the HR-OS1 Compatible DYNAMIXEL Servos AX-12A AX-18A This product is just the single metal bracket. This frame requires a Hub & Washer, an M3 * 10 bolt, and 4 M2*6 bolts (both bolts can be found in the Nut and Bolt Variety Pack). The AX-12A comes with this hardware, but the AX-18 does not. ...

The BIOLOID Compatible Metal F2 Bracket is an aluminum replacement for the standard BIOLOID F2 bracket. 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. Compatible DYNAMIXEL Servos AX-12A AX-18A AX-12W MX-12W This product is just the single metal bracket. This frame requires a Hub & Washer, an M3 * 10 bolt, and 4 M2*6 bolts (both bolts can be found in the Nut and Bolt Variety Pack). The AX-12A comes with this hardware, but the AX-18 does not. ...

The BIOLOID Compatible Metal F3 Bracket is an aluminum replacement for the standard BIOLOID F3 bracket. 4 tapped holes on the top of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the HR-OS1 Compatible DYNAMIXEL Servos AX-12A AX-18A

The BIOLOID Compatible Metal F4 Bracket is an aluminum replacement for the standard BIOLOID F4 bracket. 12 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the HR-OS1 Compatible DYNAMIXEL Servos AX-12A AX-18A This product is just the single metal bracket. This frame requires a Hub & Washer, an M3 * 10 bolt, and 4 M2*6 bolts (both bolts can be found in the Nut and Bolt Variety Pack). The AX-12A comes with this hardware, but the AX-18 does not. ...

The BIOLOID Compatible Metal F4 Bracket is a aluminum replacement for the standard BIOLOID F4 bracket. 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the HR-OS1 Compatible DYNAMIXEL Servos AX-12A AX-18A Two F6 Brackets, One F7 Bracket, and Two AX-Series Servos (AX-12A, or AX-18A) are required to create a dual joint. This product is just the single metal bracket. This frame requires a Hub & Washer, an M3 * 10 bolt, and 4 M2*6 bolts (both bolts can be found in the Nut and Bolt Variety Pack). The AX-12A comes with this hardware, but the AX-18 does not. ...

The BIOLOID Compatible Metal F12 Brackets are an aluminum replacement for the standard BIOLOID F12 bracket Pair. These plates make great feet for your next robot. This is the same frame as used in the HR-OS1. Compatible DYNAMIXEL Servos AX-12A AX-18A This product contains 2 plates. Each plate is usually used in conjunction with a dual axis joint, consisting of 1 F5 Bracket, 2 F6 Brackets, 1 F7 Brackets and 2 AX servos. ...

Are you having problems with your DYNAMIXEL AX-12A because of worn out gears? The AX-12A Gear Set will get your AX-12 servos functioning in no time! Check out the video below to see how easy it is to replace your gears. Includes: AX-12A Gear #1(plastic) : 1 piece AX-12A Gear #2(plastic) : 1 piece AX-12A Gear #3(plastic) : 1 piece AX-12A Gear #4(plastic) : 1 piece AX-12A Wheel Gear(plastic): 1 piece Exclusive Grease: 1 piece NOTE:These gears are NOT compatible with AX-12+/AX-18F/AX-18A Actuators. ...

If you're experiencing performance issues with your DYNAMIXEL AX-18A due to worn-out gears, the AX-18A Gear Set is an ideal replacement solution. It allows you to restore your servos to optimal functionality quickly and easily. A step-by-step video is available to guide you through the gear replacement process.

What’s Included:

• AX-18A Gear #1 (plastic): 1 piece
• AX-18A Gear #2 (plastic): 1 piece
• AX-18A Gear #3 (plastic): 1 piece
• AX-18A Gear #4 (aluminum): 1 piece
• AX-18A Wheel Gear (plastic): 1 piece
• Exclusive grease for smooth operation: 1 piece

Important Notes:

• These gears are NOT compatible with AX-12+, AX-18F, or AX-12A actuators.

Automate Gear Maintenance Tracking with Latenode

Latenode can enhance your maintenance routines by automating reminders for gear inspections or replacements based on usage data. Use Latenode to:

• Monitor operational hours of AX-18A servos.
• Generate alerts when maintenance or part replacement is due.
• Log maintenance history for better tracking and planning.

By integrating these workflows, you ensure consistent servo performance while minimizing downtime in your robotics projects.