Products 1-12 of 15
Show
3s 11.1V 2200mAh 30C LiPo Battery arduino battery, LiPo, Lithium Ion Battery, LiPo Battery, 3 cell lipo battery, 11v lipo battery, 2200mAh battery, 3s 11V 2200mah 25C lipo battery
Price: $19.95
Availability: In Stock

    Whether you've got a crawler, biped or rover, you're going to need a battery pack to get your robot moving on its own. Lithium Polymer batteries are a great choice for robot batteries because they have great capacity-to-weight ratios, giving you lots of power for very little weight. Our 3s 11.1V 2200mAh 30C LiPo Battery is a great medium sized battery that can discharge up to 66A continously! To make it easy to connect/disconnect the battery from your project, each of these batteries has a Female T-Connector (Deans Ultra Plug compatble). They also have a standard 4-pin JST connector (.1"/2.54mm) that breaks out each cell for balance charging or battery testing. You can charge these batteries with our Mini Balance Charger or the Imax B6...

    Floureon 11.1V 4500mAh 30C LiPo Battery arduino battery, LiPo, Lithium Ion Battery, LiPo Battery, 3 cell lipo battery, 11v lipo battery, 4500mAh battery, 3s 11V 4500mAh 25C lipo battery
    Price: $29.95
    Availability: In Stock

      Whether you've got a crawler, biped or rover, you're going to need a battery pack to get your robot moving on its own. Lithium Polymer batteries are a great choice for robot batteries because they have great capacity-to-weight ratios, giving you lots of power for very little weight. Our 3s 11.1V 4500mAh 35C LiPo Battery is a great medium sized battery that can discharge up to 66A continously! To make it easy to connect/disconnect the battery from your project, each of these batteries has a Female T-Connector (Deans Ultra Plug compatble). They also have a standard 4-pin JST connector (.1"/2.54mm) that breaks out each cell for balance charging or battery testing. You can charge these batteries with our Mini Balance Charger or the Imax B6...

      LiPo Battery Wiring Harness battery, wiring, harness, power, dean plug, barrel plug, battery link, lipo battery harness, lipo harness
      Price: $8.95
      Availability: In Stock

        Easily link your project to a LiPo battery with the Battery Wiring Harness! This harness is the same one we use in our Hexapod and Quadruped kits. Just attach the male Dean connector to any of our LiPo Batteries and the barrel jack plug into your project, and you're ready to go! The harness even has a built in switch to quickly shut down power to your project. The switch is easily mountable - just cut a 6mm hole into your project and use the included nut and washer to securley fasten the switch to your chassis. The standard 2.1*5.5 male barrel jack connection will fit any 2.1*5.5 female barrel jack connection, such as Arduino/Seeduino Boards, a Female Pigttail Lead or the AX/MX Power Hub. Alternativley, you can just cut of the barrel jack...

        Imax B6 Multi-Function LiPo Balance Charger Imax, B6, Multi-Function, Balance, Charger, LiPo, Lithium, Polymer
        Price: $34.95-$54.90
        Availability: In Stock

          The IMAX B6 is an advanced multi-function charger, able to charge, balance and discharge Lion, LiPo, LiFe (A123), NiCd and NiMH batteries. It can also be used to charge Lead Acid (Pb) batteries. It has a wide variety of voltage settings for charging various cell count batteries, as well as a 0.1 amp adjustable charge rate of up to 5 amps. To use this charger with our line of Thunder Power LiPos, you will need an E-Flite Balance Charger Adapter Cable Pack. This charger requires an 11-18v input source rated at 5 amps, and uses a 2.5mm/5.5mm jack (adapter for our 2.1/5.5mm power supplies found here.) Use the drop down above to add one of our 12v 5A Power Supply and Adaptor Jack along with your charger. Product Features Microprocessor...

          Tiger 7.4V 4500 MAH 30C LiPo Battery with T Plug Lion, 7.4V, 4500, MAH, 30C, T Plug, dean, connector, lithium, ion, volt, 3c, cell, 3, robot, battery, tiger, lipo, polymer
          Price: $29.95
          Availability: In Stock

            Whether you've got a crawler, biped or rover, you're going to need a battery pack to get your robot moving on its own. Lithium Polymer batteries are a great choice for robot batteries because they have great capacity-to-weight ratios, giving you lots of power for very little weight. Our Lion 7.4V 4500 MAH 30C Battery is a great medium sized battery that can discharge up to 55A continously! To make it easy to connect/disconnect the battery from your project, each of these batteries has a Female T-Connector (Deans Ultra Plug compatble). They also have a standard 4-pin JST connector (.1"/2.54mm) that breaks out each cell for balance charging or battery testing. You can charge these batteries with our Mini Balance Charger or the Imax B6...

            Variable Power Supply 15-24V 4.5A (2.1mm Jack) Variable Power Supply 15-24VDC 4.5A - US
            Price: $24.95
            Availability: In Stock

              Variable Power Supply for general project use. North American Style Plug 15-24VDC 4.5A - US Center Positive Polarity, 5.5x2.1MM PS - You might want one of these too.

              1-8S LiPo Battery Voltage Tester/Monitor LiPo Battery Tester, LiPo Battery Monitor, Battery Monitor, 1-8s
              Price: $12.95
              Availability: In Stock

                Managing your LiPo battery is a must. If you let your battery get to low you can diminish the capacity of your battery or even render it unusable. That's where our 1-8S LiPo Battery Voltage Tester/Monitor comes in. First, this unit can be used to test your battery's voltage. It will display the total voltage of your battery, then cycle through and display the voltage of each individual cell. Secondly, the unit will monitor your battery and sound an alarm when one if its cells falls below a preset voltage. You can use the unit's pushbutton to set that voltage anywhere from 2.7-3.8V, or turn it off completely. This monitor mode will only work for 2-8 cell batteries. The unit's pins are spaced at the standard .1"/2.54mm, so they will plug...

                12v10a Power Supply 12v10a Power Supply
                Price: $19.95
                Availability: In Stock

                  12VDC, 10 Amp Power Supply for general project use.Center Positive Polarity, 5.5x2.1MM barrel jack.

                  7v5A Power Supply
                  Price: $11.95
                  Availability: In Stock

                    7VDC, 5 Amp Power Supply for general project use. Center Positive Polarity, 5.5x2.1MM barrel jack.

                    AX/MX Power Hub 3/4 view
                    Price: $7.95
                    Availability: In Stock

                      The 6 Port RX/EX Power Hub is a must have accessory for any DYNAMIXEL user working with 4-pin servos.  The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring a breeze. However sometimes you need to split your DYNAMIXEL chain into multiple directions. Just plug a 4-Pin Dynamixel Cable from your controller to any port on the hub, and you'll have 5 ports available for DYNAMIXEL's 4-pin servos. This hub has the added benefit of 2 power breakouts. You can plug in bare wire with the screw terminal block, or plug in power through the DC barrel jack. The 2.1*5.5 female barrel jack will accept any of our SMPS power supplies as well as our Battery Wiring Harness. The RX/EX Power Hub is compatible with the...

                      2.1/5.5mm Jack to 2.5/5.5mm Plug Adapter 2.1/5.5mm Jack to 2.5/5.5mm Plug Adapter
                      Price: $3.95
                      Availability: In Stock

                        This is an adapter that converts a 2.1/5.5mm Jack into a 2.5/5.5mm Plug. This will adapt our 2.1/5.5mm plug power supplies into a 2.5/5.5mm plug.

                        AX/MX Power Hub 3/4 view
                        Price: $4.95
                        Availability: In Stock

                          The 6 Port AX/MX Power Hub is a must have accessory for any DYNAMIXEL user. This little board is a Bioloid 6 Port Hub and a SMPS adaptor all in one! The DYNAMIXEL communication bus allows you to daisy chain multile servos, making wiring a breeze. However sometimes you need to split your DYNAMIXEL chain into multiple directions. Just plug a 3-Pin Dynamixel Cable from your controller to any port on the hub, and you'll have 5 ports avaialble for DYNAMIXEL servos. This hub has the added benefit of 2 power breakouts. You can plug in bare wire with the screw terminal block, or plug in power through the DC barrel jack. The 2.1*5.5 female barrel jack will accept any of our SMPS power supplies as well as our Battery Wiring Harness. The AX/MX Power...